H Type Hydraulic Press

Frame Contraction : Frame is fabricated from IS-2062 graded rolled steel plates table and cutting beam deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. These frames are strain free and eliminate welds at load supports. Thus the accuracy of the machine is never disturbed.

Table & Slide (Ram) : Table and Slide are made of high grade heavy duty cast iron/steel fabricated and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precision press operation.

Cylinder : The cylinder bodies are precisely made from forged steel material duly bored and fine honed or long sealing life. The piston rods are made from EN-8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

Hydraulic System : The compact blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low noise hydraulic system is placed on the rear side of machine, on the rear side of machine, on top between two side plates. Pressure relief values are provided to safe guard the system and machine from overload. The hydraulic system is driven by an electric motor of reputed brand and is coupled with a pump capable if generating more than the required pressure. Pressure gauge for system pressure, back pressure and holding pressure are providing on top of oil tank for quick reference.

Electrical Control Panel : The electrical control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if need to be replaced. It is wire cleanly and labeled/ferruled properly as per the international practices to help easily locates any fault and replaces components conveniently.

Frame Construction:
Frame Is Fabricated From Is-2062 Graded Rolled Steel Plates Table and Cutting Beam Is Deeply Reinforced and Fines Machines after Stress Reliving. The Interlocked Design Put The Direct Support To Frame. This Frame Is Strain Free And Eliminates Welds At Load Supports. Thus The Accuracy Of The Machine Is Never Disturbed.

Cylinder:
The Cylinder Bodies Are Precisely Made From Forged Steel Material Duly Bored And Fine Honed For Long Sealing Life. The Piston Rods Are Made From En 8 Material Having Low Carbon Contents. The Piston Rod Is Hard Chrome Platted (200 Micron).

Hydraulic System:
The Compact Blocks Eliminate The Leakage Chances And Also Reduces The Hydraulic Pipes. This Low Noise Hydraulic System Is Placed On the Rear Side of Machine, On Top between Two Side Plates. Pressure Relief Value Is Provided To Safe Guard The System And Machine From Overload. The Hydraulic System Is Driven By An Electric Motor Of Reputed Brand And Is Coupled With A Pump Capable Of Generating More Than The Required Pressure. Pressure Gauge For System Pressure, Back Pressure And Holding Pressure Are Providing On Top Of Oil Tank For Quick Reference.

Standard Accessories:

• Power Pack With All Hydraulic Component
• Variable Stroke Adjustment with Limit Switch
• Two Nos. of ‘V’ Block.
• Two Nos. of Table Supporting Rod.
• Bed Handle

Optional Accessories:

• Front Operator Electric Control Box
• Movable Foot Switch
• Stroke Counter
• Bed Plate
• Motorized Bed For, Automatically Up & Down Movement

A hydraulic press is an extremely important equipment for a wide variety of industries. It converts the metallic objects into metal sheets. The H Type Hand Operated Hydraulic Press gets its name due to the shape of the machine that is in the form of letter “H”. It is operate manually and helps in compressing the material to its maximum permissible limit. One of the major advantages of the H type hand operated hydraulic press is that it is one of the cheaper yet efficient modes of performing the operation of compressing metallic parts.